FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Jrpumper on January 20, 2014, 10:39:07 PM

Title: My 390 build
Post by: Jrpumper on January 20, 2014, 10:39:07 PM

   Im building a 390 ,its consist of a virgin 390 block bored .30 with icon forged pistons , comp cam282 magnum hyd flat tappet , a set of edelbrock  heads new untouched , im gona use long tubes and flow master for exhauste , im undecided about wich intake to run..... do you guys think this setup would work with factory 2x4 setup  ?  i have a single plane street dominator  but idk.....

Title: Re: My 390 build
Post by: jayb on January 20, 2014, 11:25:58 PM

The low-riser factory 2X4 setup, that came on the '63 and '64 cars, would be a good match for that engine.  The Holley Street Dominator is also an excellent intake, but probably wouldn't make as much lower end torque as the 2X4 setup.  I think you'd be happy with either intake, though...