FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: 2VNTG68S on October 17, 2013, 08:22:23 PM

Title: '68 Vert 390 build - cross link
Post by: 2VNTG68S on October 17, 2013, 08:22:23 PM

crosslinking a thread I just started.  Sorry, bit of a newb here, wasn't sure where it belonged?

http://fepower.net/simplemachinesforum/index.php?topic=1387.0

Title: Re: '68 Vert 390 build - cross link
Post by: cjshaker on October 20, 2013, 01:06:06 AM

Very similar to the cam I have in my '68 F250, also using a Holley 750, which seems to be a perfect carb size for it. Should be a pretty torquey set-up with just a little bit of a lope with that 109 LSA. Easy on the valvetrain too. Power will be done by 5000rpm, but it'll run to 5500 nicely. A good choice for a low maintenance street build in my opinion.