FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: AlanCasida on November 09, 2026, 05:45:23 PM

Title: Scat crank will not balance
Post by: AlanCasida on November 09, 2026, 05:45:23 PM
I got a call from my machinist this afternoon and he said my Scat 3.98 crankshaft will not balance. He said they tried internal and external and even tried adding a 428SCJ hatchet spacer to the front, but it was still way out. He said right now they were looking at maybe $700 worth of mallory to get it. This is on my 416 econo build using Sealed Power cast pistons and OEM rods.  He did note there was a discrepancy in the p/n on the box and the p/n on the crankshaft. The box has 9-428-3980-6490-2438. The p/n number on the crank is 427-3980-6490-22r. I couldn't find anything on the 'net correlating to that number. I have my stuff at Gessford Machine Shop, so I have absolute confidence in what he is telling me. Any ideas?   
Title: Re: Scat crank will not balance
Post by: hbstang on November 09, 2026, 09:10:21 PM
sounds familiar lol.i called the retailer i bought crank from and they had scat accept the return,and paid to pick it up and send a new crank to my out of state builder no charge.engine builder had it done in an hour with only a couple small slugs of heavy metal.mine did end up with 2225 bobweight ,but balanced out great.
at least scat stood behind there product.


https://fepower.net/simplemachinesforum/index.php?topic=13195.0
Title: Re: Scat crank will not balance
Post by: MRHP on November 20, 2026, 03:13:18 PM
Just spit balling here but the last set of numbers look like rod journal sizes. 2.438-standard FE rod journal. 2.200 BBC with large "r" Radius.