FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: 427Fastback on August 26, 2026, 07:55:56 PM

Title: #13001 Intake adaptors
Post by: 427Fastback on August 26, 2026, 07:55:56 PM

Question for Jay. It would appear production is going to end for these. Curious as to how many you produced of the 13001 manidolds. I believe I have #7 and 8. Thanks ..Cory

Title: Re: #13001 Intake adaptors
Post by: jayb on August 28, 2026, 03:17:34 PM

Correct, production is over.  Total sales were just over 500, but probably 50-75 of those were for tunnel ports, high risers, or my cylinder head package.  So as a guess, around 450 of the 13001s.

Title: Re: #13001 Intake adaptors
Post by: 427Fastback on August 28, 2026, 04:33:05 PM

Thanks for the answer Jay and thanks for all your hard work....  Cory

Title: Re: #13001 Intake adaptors
Post by: bsprowl on August 28, 2026, 09:23:00 PM

I need an Edelbrock Torker cut to fit your #13001. Do you still do that?

Title: Re: #13001 Intake adaptors
Post by: jayb on September 01, 2026, 06:56:19 PM

Sorry Bob, not doing any manifold mods anymore.  If you have some time, you can do it with a die grinder and a hacksaw though...

Title: Re: #13001 Intake adaptors
Post by: Mark Bliss on September 02, 2026, 05:07:37 PM

Unfortunate news.
But that's the old FE life isnt it?

Title: Re: #13001 Intake adaptors
Post by: bsprowl on September 02, 2026, 10:22:32 PM

I know it can be done that way but I'm not looking forward to it.  I have no idea where to make the cuts so it will be a slow process.

Title: Re: #13001 Intake adaptors
Post by: thatdarncat on September 03, 2026, 01:38:08 AM

Quote from: bsprowl on September 02, 2026, 10:22:32 PM

I know it can be done that way but I'm not looking forward to it.  I have no idea where to make the cuts so it will be a slow process.

Jay’s instructions with the FE Power intake adapter included a template for where to cut the 351C intake manifold.

Title: Re: #13001 Intake adaptors
Post by: Joe-JDC on September 03, 2026, 01:47:23 PM

Bob, I have one of those already cut and been on the dyno.  I don't need it.  Cheap.  Joe-JDC

Title: Re: #13001 Intake adaptors
Post by: Mark Bliss on September 03, 2026, 05:32:21 PM

Hey Joe,
Are you selling the adapter as well?

Title: Re: #13001 Intake adaptors
Post by: Joe-JDC on September 03, 2026, 08:07:25 PM

The adapter is a 13012 that has not been opened up to fit anything as yet.  Yes, it is for sale.  Joe-JDC