FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: MeanGene on April 11, 2026, 09:23:51 AM

Title: Nice Edelbrock 6008 MR heads with 2.165/1.7 valves by DSC
Post by: MeanGene on April 11, 2026, 09:23:51 AM

Nice earlier (before the move) Edelbrock RPM #6008 heads, came from and nicely prepped by DSC Motorsports. Ports cleaned up, chambers polished, 2.165/ 1.7 valves installed, and double valve springs and good retainers that were set up for Comp 294/.605 solid cam. Nice set of heads, never installed, ready to run on your 427 or 428. Shipping available at buyer's expense.
Located in Napa, CA
$2200 plus shipping

Title: Re: Nice Edelbrock 6008 MR heads with 2.165/1.7 valves by DSC
Post by: Stangman on April 11, 2026, 09:14:43 PM

Is it just me or do those chambers look deep. What’s the CCs on those.

Title: Re: Nice Edelbrock 6008 MR heads with 2.165/1.7 valves by DSC
Post by: MeanGene on April 12, 2026, 07:49:19 AM

Quote from: Stangman on April 11, 2026, 09:14:43 PM

Is it just me or do those chambers look deep. What’s the CCs on those.

It's just you lol. They are what Edelbrock called the 427 style, they have Medium Riser style chambers, they say 76cc

Title: Re: Nice Edelbrock 6008 MR heads with 2.165/1.7 valves by DSC
Post by: 427Fastback on April 12, 2026, 01:24:36 PM

Same heads I have. I CC'd them and they are indeed 76 CC. They were easily converted to 16 bolt exhaust as well...

Title: Re: Nice Edelbrock 6008 MR heads with 2.165/1.7 valves by DSC
Post by: Stangman on April 12, 2026, 07:14:06 PM

Ha ok caught my eye wrong then. Maybe cause they are shiny or something.

Title: Re: Nice Edelbrock 6008 MR heads with 2.165/1.7 valves by DSC
Post by: MeanGene on April 13, 2026, 11:56:45 AM

SOLD