FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: jetfired on March 09, 2026, 10:18:25 AM

Title: Valve cover leak
Post by: jetfired on March 09, 2026, 10:18:25 AM

Trying to seal jays clear valve cover with not much luck. One is holding up but one keeps giving me trouble
 Would like to know the best type of gaskets and  if I should use any sealer as well thanks. Keith

Title: Re: Valve cover leak
Post by: jayb on March 09, 2026, 07:16:58 PM

Make sure the aluminum frame is still flat and not twisted.  I always use the Felpro cork gaskets on mine, glued to the valve cover rail on the head and intake, with a dab of sealer at the junctions between head and intake.  They should seal up fine that way.

Title: Re: Valve cover leak
Post by: Stangman on March 09, 2026, 10:16:58 PM

X2 what Jay said no matter what valve cover