FE Power Forums
FE Power Forums => Vendor Classifieds => Topic started by: blykins on February 13, 2026, 07:39:02 AM
-
Got this one that's been laying on the shelf for several years.
It's a billet core solid flat tappet, so you'll have to run DLC coated tool steel lifters.
265/278 @ .050", 108 LSA, .715" gross lift with 1.76 rocker.
$350 plus shipping.
I also have another billet core solid flat tappet camshaft that I had Bullet grind for me, but it's going to be a very rare bird as it was ground for a flat plane crankshaft. The firing order is a Ferrari firing order. Chances are there are absolutely zero people who will ever be able to use it, but it may make a good lamppost or something......
Fair offers accepted for either cam.
-
I, am interested in this cam for a 482 Tunnel Port headed motor. Shipping cost's to 92691 ?
Got this one that's been laying on the shelf for several years.
It's a billet core solid flat tappet, so you'll have to run DLC coated tool steel lifters.
265/278 @ .050", 108 LSA, .715" gross lift with 1.76 rocker.
$350 plus shipping.
Fair offers accepted for either cam.
-
Shoot me an email:
brent@lykinsmotorsports.com