FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: smokin427 on February 06, 2026, 01:42:56 AM

Title: BBM Block
Post by: smokin427 on February 06, 2026, 01:42:56 AM

Has anyone had issues with BBM block oiling system?

Title: Re: BBM Block
Post by: blykins on February 06, 2026, 09:57:53 AM

In what regard?

Title: Re: BBM Block
Post by: Barry_R on February 06, 2026, 11:47:49 AM

Quote from: blykins on February 06, 2026, 09:57:53 AM

In what regard?

Same here...
Waiting for more detail before I can craft a response.

Title: Re: BBM Block
Post by: Ghoughton on February 06, 2026, 06:13:14 PM

My top oil galley wasn’t drilled all the way so it wouldn’t feed the lifters…

Title: Re: BBM Block
Post by: SAcobra427 on April 02, 2026, 08:39:56 PM

My new BBM block { 2022} would not allow hardly any oil up to the rockers on the pass side when I first primed it, thought maybe the one cam bearing was installed wrong but that was not the case, and the head gasket hole  for the oil passages was fine also. just ended up oiling through the pushrods instead  {thanks Brent} has been good for 3 years now.