FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: hbstang on August 19, 2025, 05:15:58 PM

Title: 427 sohc blower pistons rods
Post by: hbstang on August 19, 2025, 05:15:58 PM

all parts located in southern cal.and plus shipping. parts added


aries custom flat top blower pistons,4.368 skirt,1.190 comp height,1.030 pin.4 brand new,5 with 5 minutes on them,really nice big bore blower sohc pistons.come with 8 pins and buttons.asking $400

venolia aluminum rods from blown sohc,2.375 rod journals and 1.030 pin.approx 6.700 c to c length.1.0 big end width and 1.200 pin width.these are for hd blower application.not sure if these are forged or billet,no info on venolia rods.asking $500 or make offer.


clark copper head gaskets for fe.3 different thicknesses ,.042 look new never bolted installed,.081 look likre installed but never ran,.124 installed and ran with sealer on them and o-ring marks,asking $100 a pair,or make offer.

Title: Re: 427 sohc blower parts
Post by: 428kidd on August 20, 2025, 07:41:38 AM

Some cool parts there!

Title: Re: 427 sohc blower parts
Post by: hbstang on August 20, 2025, 02:21:17 PM

much more cool in somebody elses garage !

Title: Re: 427 sohc blower parts
Post by: hbstang on September 19, 2025, 09:10:25 PM

new parts added

Title: Re: 427 sohc blower parts added
Post by: hbstang on April 02, 2026, 02:31:07 PM

most of these parts are still here so make offer.

Title: Re: 427 sohc blower parts added
Post by: XR7 on April 02, 2026, 05:24:51 PM

are you keeping the crank? What stroke was that? Mopar rod journal from the looks of it.

Title: Re: 427 sohc blower parts added
Post by: hbstang on April 02, 2026, 07:24:01 PM

yes, 2.375 rod journal bbc snout 4.375 stroke and i am going to try to use it on a build with shelby block.