FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: Lenz on September 02, 2013, 06:38:37 AM
-
Clear PA title, solid car except floor pans and LH rocker, new 18 gauge replacements for these go with car, built in Dallas and brought from Texas. Includes extra complete drum to drum 1957 9" (open, 3.00:1), two extra front fenders, two extra doors, complete 272 Y block (41,000 miles from donor car), bell housing and 3 speed trans. All stainless there plus a complete set of Custom 300 stainless goes also. Have good seats and all parts to reassemble organized including glass. Will gladly discuss any details and answer any questions. $3,600 or make offer.
-
I would like to see some pics if you have any?
Thanks!
Rodney
-
Rodney,
Managed 1 pic, can't get my camera below 124KB, max for the site is 128KB. Still fooling with cropping, might be able to put up more.
Thanks,
Len
-
I just checked the site setup and there should be no limit on the size of the pictures. Are you getting an error when you try to upload larger pics?
-
Thanks for checking, got an error message, per photo max is 128KB, total max of up to four photos is 192KB. Tried posting another shot anyway and received the message that the file was too large (the second shot was also 124KB like the one posted now). Resized another down to 80KB, can't add it either. Gonna try adding a trunk floor shot I've got down to 50KB. Lower left shows a localized rust through spot.
-
Here's another photo, inside facing rear seat area. Wheelhouses, floors and inside quarters very solid, no rust out beyond pans. Believe that the rubber cowl drain tubes were long ago rotted out allowing water to leak in and lie on floor pans.
-
Would it be easier to email them to me?
427merc@gmail.com
Thanks!
Rodney
-
Thanks for checking, got an error message, per photo max is 128KB, total max of up to four photos is 192KB. Tried posting another shot anyway and received the message that the file was too large (the second shot was also 124KB like the one posted now). Resized another down to 80KB, can't add it either. Gonna try adding a trunk floor shot I've got down to 50KB. Lower left shows a localized rust through spot.
Hmmmmm, this is a little confusing to be sure. I will look again; sorry for the inconvenience - Jay
-
Thanks Jay, I appreciate your efforts. It seemed to work later yesterday by making photos smaller and posting individual photos with a single reply. I see now that it didn't work. Problem must be on my end if others aren't having issues, but I don't yet see what I'm doing wrong.
Rodney, I'll email some photos to you later today, don't have the photos on my work computer.
Thanks,
Len
-
Interested please email me at forrestsraiders@yahoo.com Thanks Lance
-
Lenz, Can you email some pictures to me? mazz151@hotmail.com I've been looking for one, where is Wattsburg? I'm In Derry PA. Thanks, Denis
-
Denis & Lance,
Will do later on today after work. Wattsburg is in the northwest corner of the state about 10 miles south and east of Erie.
Thanks,
Len
-
I'm going to try to add a few more pictures here, hope I got everyone's request via emails. Thanks all,
Len
-
And again-
-
and again with pans lying in place
-
and pans out. Remaining steel is solid, braces and frame are good.
-
All, thanks, car is sold. Appreciate the site and those who expressed interest-
Len
-
Just wanted to let every one know that a friend of mine bought the car. The seller was stand up all the way. Car was all he said it was. Very helpful in the pick up and loading of the parts. Just wanted to say thank you for helping in everything and being so honest! Thanks
-
Lance, was he in the western Pa area this weekend ? I saw a 57 that looked like this car on I90 when I was coming home from Canfield on saturday It also could have been on I76/80 as I was at Summit in the mid afternoon.
-
Yeap I am sure that could have been him. Not sure of his exact route but he was in PA this weekend. If you saw him pulling it with a trailer and a new ford id say your correct. Thanks Lance.
-
Thanks for the kind words Lance. As for friend Rick I think he'd make a great neighbor! GJCAT427 I'm certain he ran 90 west to 271 to 71 south, so anyone along that route could easily have noticed him. Think he left out about 4:00pm.-Len
-
Time line is right. It was about 4:30-5:00 when I saw it. By then I had gotten off OH RT11 heading west When I saw it. Sure looked good from the other side of the rd.