FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: dozz302 on September 14, 2024, 07:38:57 PM
-
Hello, looking at a FE head but 1 hole looks like was sitting in water and threads were corroded pretty bad. Is there a way to repair the hole successfully 100%. Would hate to put on a motor then have problems with later while changing plugs and have to pull the head. Thanks
-
Lots of different types of spark plug rethreader's, inserts, repair kits out there from basic to "professional". For what it's worth i used a cheap rethreader kit from Amazon and repaired 2 holes on my old 360 beater truck about 10 years ago and have had zero problems. I did loctite them in and always use anti seize on those 2 plugs.