FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: driveamerican on August 20, 2024, 04:38:06 AM
-
I understand trick flow is having casting problems for some reason seems it is just their fe heads. That said opinions on weather edelbrock will update their fe heads they seem to be very inexpensive these days.
-
Trick flow has had foundry issues, there supposed to be working through this, but little evidence to that. Edelbrock fills a gap of a good stock replacement style head, but I don't think you will see them improved upon, or at least by them.
-
I was told, that edelbrock still does the casting work for Trickflow, the FE heads, plus some LS stuff. Edelbrock has had a lot of problems after closing the Torrance California casting facility. Edelbrock are down to one facility, and having problems, getting materials, consistently. Plus knowledgeable workers. McDonald's is paying $20/hour +
-
I was thinking edelbrock might notice how well the trick flow head was received maybe they would make some changes. We all appreciate what they have done and personally any rebuild on a budget gets edelbrock heads can't beat them for the cost.