FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Boiler Ben on August 17, 2024, 04:46:19 PM

Title: Oil pan bolts
Post by: Boiler Ben on August 17, 2024, 04:46:19 PM

I’ve ordered a Aviaid Cobra style oil pan that has a windage tray and needs two gaskets.  I’m trying to figure out the bolt length I need.  There is about 9/16” of thread depth in the block.  Does anyone know what I should use?

Title: Re: Oil pan bolts
Post by: blykins on August 18, 2024, 04:13:57 AM

I think I use a 1” bolt when I use their pans.

Good luck getting that thing to fit.

Title: Re: Oil pan bolts
Post by: Boiler Ben on August 18, 2024, 06:35:01 AM

Oh boy, sounds like this could be a challenge.  Hoping they send some instructions with it.

Title: Re: Oil pan bolts
Post by: blykins on August 18, 2024, 11:18:29 AM

Not a chance.