FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: dozz302 on August 12, 2024, 08:04:43 PM

Title: C5AE-N Medium Riser Intake 1x4
Post by: dozz302 on August 12, 2024, 08:04:43 PM

Does anyone have any photo's of the C5AE-N intake for the 427 Medium Riser. 1x4 prior to the Sidewinder. I believe these are the only 1x4 intakes Ford made for the W Code Medium Riser 1x4 engines from 1965 - 1967.

Title: Re: C5AE-N Medium Riser Intake 1x4
Post by: Joe-JDC on August 12, 2024, 09:02:53 PM

Check out Jay's book "The Great FE Intake Comparo" page 100 for several pictures of the C5AE-N intake.  Joe-JDC

Title: Re: C5AE-N Medium Riser Intake 1x4
Post by: thatdarncat on August 13, 2024, 02:49:47 PM

I have a C5AE-9425-N intake, it’s the same one Jay tested for his book, and the one pictured in the book. Everyone should have a copy of the book  ;)

Here’s a picture. Someone in the past drilled & tapped a hole in the #4 runner, probably for a vacuum port, so that’s not original.

I think people have commented in the past that these came in both aluminum and magnesium, mine is aluminum.

(https://i.postimg.cc/7Z2JDN6s/17-FD0587-9529-488-C-A71-A-3997-F8-D1-A038.jpg) (https://postimg.cc/NKQjkmRm)

Title: Re: C5AE-N Medium Riser Intake 1x4
Post by: dozz302 on August 17, 2024, 04:19:01 PM

Great Picture Thanks