FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: mike7570 on August 06, 2024, 08:14:13 PM
-
Car only no driver. I built the car with as much weight savings as I could afford and still be legal for stock eliminator. I weighed the car on digital scales at a local feed store that can also supply certified weights for DMV purposes. I was surprised at the total, Pictures are in member projects.
NHRA factors the car weight based on hp (mine 388) X factor + 170lb for driver.
So my class choices and weight are:
AA/SA 3,080lb
A/SA. 3,274lb
B/SA. 3,468lb
I’ll post car weight Friday afternoon
-
This should be fun. I have never weighed my car on digital scales but I four cornered it with henne scales at work. It was like 5 years ago and I usually round it off to 3400 to 3450. With your weight savings I’m thinking 3322. Just adding the 2 lbs to be different.
Regardless it’s a beautiful car.
I forgot racecar I would like to lower my guess by 100 lbs to 3222.
-
I think you could get it to 3120. We haven't scaled ours yet now that the engine is in.
-
Yes race car, the reason I was surprised was because when I drove it onto the scale it showed 2,920lb (without driver)
I double checked the scale was reset and stood on it, yep 200lb which is what I weigh. I weighed it again with me in it and it was 3120.
Surprisingly Mike Brunson was right on except his 3120 should have been without the driver. 😁
-
2920 that’s light. My registration with a 289 and c-4 is 2920.
-
Wow that's light! I wonder what ours will be....coupe should be a hair lighter right? If ours was under 3000 pounds I'd be very happy.
-
To get to 2920 / 3120
Aluminum heads and intake
4wheel disc brakes
Light weight wheel and tires
Fiberglass hood and trunk lid
Light weight Kirkey front seats, no back seat
5 gallon fuel cell
Cal trac split mono leafs.
Removed wiper mechanism, heater parts, factory wiring, undercoating and fuel tank
Items that added to factory weight - (or could be even lighter)
Roll bar, standard optima battery, BBM block, heavy steel drive shaft, 200lb driver