FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: 1932fe on July 23, 2013, 12:20:47 AM

Title: What pulleys were on a 427 sohc
Post by: 1932fe on July 23, 2013, 12:20:47 AM: Hi
Wondering what front pulleys on the water pump and crank, only looking for single grove ones were on the 427 sohc , as am looking for stock or similar stock for the coupe engine, I have heard 61-62 thunderbird , as well as 61-62 galaxies, anyone have some insight to this, As cant run after market ones as not the right look for engine style.
Thanks Paul
Title: Re: What pulleys were on a 427 sohc
Post by: hotrodfeguy on July 24, 2013, 11:04:07 PM: I know the WP is 61 T-bird. I was going to build a cammer one day but have decided to go full tilt wedge. With a help from a few friends :)
Title: Re: What pulleys were on a 427 sohc
Post by: jayb on July 25, 2013, 07:35:41 PM: Here is the crankshaft pulley info, courtesy of my old friend SOHC Bob (RIP):

The Sohc parts

C4AE-6316-E Damper Assy Crankshaft Vibration 4000-4400 CPM -1

C5AE-6A359-F Crankshaft Pulley Outer - 1

Screw And Washer Assy 374525 (Attach Pulley To Damper) - 3
Title: Re: What pulleys were on a 427 sohc
Post by: 1932fe on July 25, 2013, 07:43:27 PM: Thank you both for the info just what was needed Thanks Paul
Title: Re: What pulleys were on a 427 sohc
Post by: hotrodfeguy on July 28, 2013, 09:26:21 AM: Are you building one?
Title: Re: What pulleys were on a 427 sohc
Post by: hotrodfeguy on July 29, 2013, 11:33:02 AM: Is the B anything like the E ?
Title: Re: What pulleys were on a 427 sohc
Post by: 1932fe on July 29, 2013, 02:02:17 PM: Hi
Yes I am building one as far as all the outer dimensions are concerned , as we have very little room so I need to know all external measurements to see how the engine sit in the rails, Have so far seen we may have to change steering box. Barry R is going to do the final build for me.
Title: Re: What pulleys were on a 427 sohc
Post by: hotrodfeguy on September 22, 2013, 10:52:22 PM: Isn't the water pump C1SE-6A301-B