FE Power Forums
FE Power Forums => Vendor Classifieds => Topic started by: blykins on January 09, 2024, 12:05:05 PM
-
I had this cam ground for a customer's engine, which is using FE Power heads, but the customer opted to have the heads CNC ported, which affects a lot of the cam specs. Has been out of the box for inspection only.
Camshaft is 271/284 @ .050", 113 LSA, .426"/.445" lobe lift. Fairly aggressive lobes that have always made *really good* power for me in the past. Require a good bit of spring load and/or light valves. You can contact me to see what the cam would do with your application before buying.
$425 plus shipping.