FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: 2013cossj on November 15, 2023, 08:32:45 AM

Title: wire terminals
Post by: 2013cossj on November 15, 2023, 08:32:45 AM

Does anyone make the origial style bullet connecters  that ford originally used.i have tried several aftermarket ons but they are not the correct size. Just thought with the number of people restoring fords someone would have repoped them.

Title: Re: wire terminals
Post by: gregb on November 15, 2023, 10:12:40 AM

https://www.ecklers.com/wire-end-bullet-style-41-21402-1.html   doesn't list the size unfortunately.....
and then there are these
https://www.ebay.com/itm/50-Sets-14-16-AWG-Ga-Blue-Vinyl-Insulated-Male-Female-Bullet-Terminal-180/173614139361?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649&mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338759170&toolid=10001&customid=130832X1595935X044b54ee0e4e2f51d98df38c3d00681d which are larger than the standard ones you usually find...

Title: Re: wire terminals
Post by: Heo on November 15, 2023, 12:26:06 PM

https://www.autoelectricsupplies.co.uk/p/standard-bullets-4-7mm-dia-crimp-or-solder
I dont know if this is the right ones. But they got a lot of intersting Car related electrical stuf