FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: drdano on July 09, 2013, 04:33:49 PM

Title: Ford FE Water Pump Differences
Post by: drdano on July 09, 2013, 04:33:49 PM

This is an FYI thread more than anything regarding the small differences in FE water pumps.  I'm in the middle of a 3G alternator swap on my '62, so a newer pump had to be installed that has the alternator mounting holes in it.  Here is a good visual of a C4SE pump (old generator style) and a newer C5AE pump on bottom (alternator style).

(http://farm4.staticflickr.com/3708/9251754872_4933a525e6.jpg)

If anyone has any other unique FE water pump photos and specs to share, post them here.  There are reverse-rotation pumps used in marine applications, but I've never seen one personally.  I'm sure someone has a photo of a cammer water pump for identification purposes.  *cough*JayB*cough*    :)

Title: Re: Ford FE Water Pump Differences
Post by: jayb on July 09, 2013, 06:36:05 PM

Don't choke there, Dr. Dano ;D  I don't have a stock SOHC water pump, but Paul Munro makes a duplicate; here's a couple of photos:

(http://fepower.net/Photos/Posts/munropump1.jpg)

(http://fepower.net/Photos/Posts/munropump2.jpg)

Title: Re: Ford FE Water Pump Differences
Post by: fe66comet on July 10, 2013, 07:14:48 AM

I do not have a photo but the heavy truck FT engines.had a few different ones also. ...Jon

Title: Re: Ford FE Water Pump Differences
Post by: turbohunter on July 10, 2013, 07:15:13 PM

This Ed pump turned up in the trunk of my Fairlane (Ed pn#8805).
(http://i1220.photobucket.com/albums/dd447/turbohunter1/Fairlane/Image25-1.jpg)
(http://i1220.photobucket.com/albums/dd447/turbohunter1/Fairlane/Image26-1.jpg)
(http://i1220.photobucket.com/albums/dd447/turbohunter1/Fairlane/Image27-1.jpg)