FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: Robin Hood on July 07, 2023, 07:56:17 AM
-
Hello all I am in need of a new cam and lifters for my 427 thunderbolt high riser. Does anybody know where you can get a brand new one? It seems like there is no availability
I am looking for as close to spec as possible
-
Alot of people are out of cores, Bullet did have some cores some time back, but not sure now. Why are you needing just cam and lifters did you have a failure?
-
The car had sat for many years and not sure if the cam had ever been broke in properly. running poorly and two lifter/lobes were scored real bad.
So, out came the engine and total clean and hone etc.
Need the cam or cant put the car back together....... :'(
-
Is there some reason to want an original? The C8AX-D was the 'Cat's PJs' a long time ago, but cam design now is so far ahead that there is, literally, no reasonable comparison.
KS
-
Got plenty of flat tappet cores available.
-
Try a bit more clarity about exactly what you want, your saying a few different things that do not add up to any one.
-
If interested, PM me, I have a customer with an original 427 D cam that did a basic clean up grind by Oregon cams , I can share his info
It was already broken in, dumbell lifters are with it and boxed in order, just going a different route with the engine