FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: Tunnelwedge on May 18, 2023, 01:24:23 PM
-
That old black cap. The pin has pushed out of the rotor and tip has wore into the brass contacts.
It took a few decades. I purchased a new MSD black cap and rotor.
The same thing will happen to the new cap and rotor if I live long enough.
The cap has been on my C2 for decades probably mid 90's. I remember buying it at Canadian Tire.
The C2 is my go to dist. It's adjusted and I use a steel gear. Mesh looks fine.
I believe the term here is "creep".
So I believe that it is now "a creepy old black cap".
(https://i.postimg.cc/tC1qR88P/IMG-20230518-093459740.jpg)
(https://i.postimg.cc/c4dzX3BJ/IMG-20230513-075918903.jpg)
(https://i.postimg.cc/Z5m440mB/IMG-20230513-121952046.jpg)
(https://i.postimg.cc/yYbcG4Cb/IMG-20230513-121930013.jpg)
-
How much end [lay does the dist have ? and what is the depth reading on the gear ( cant blow pic up enough to read you caliper clearly ) and how about a pic of the bottom of the gear .
-
bigger AI robot pics