FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: bartlett on June 23, 2013, 04:32:54 PM

Title: Ford Fe valve covers
Post by: bartlett on June 23, 2013, 04:32:54 PM

Im wanting a new set of covers. I have issues tho. MY stock powered by ford chrome covers Just fit past my brake booster. And I mean just. I got rollers under there and had to mod the covers to not hit the baffles.  I would like some aluminum covers,but Im not sure what will fit ? has anyone had this problem ?

Title: Re: Ford Fe valve covers
Post by: bn69stang on June 23, 2013, 05:58:20 PM

ON my 69 mach i have tall alum finned covers , they are close to the booster but i am running the one that is from Master power  brake . I had to convert manual drum to power disc , I believe the booster is smaller in diameter than the factory booster s . dont know if that helps .. There is about a half inch between the 2 .. B n69stang

Title: Re: Ford Fe valve covers
Post by: afret on June 23, 2013, 06:15:15 PM

The Ford aluminum CJ covers work and look great.  They came on cars with the brake boosters.  Erson, HS, Dove/Comp, and T+D rockers fit fine under them with the baffles taken off.

Title: Re: Ford Fe valve covers
Post by: bartlett on June 23, 2013, 08:08:09 PM

yea I'm running the MPB booster.   

Thanks for the replys so far ... ;D

Title: Re: Ford Fe valve covers
Post by: nandoz on June 24, 2013, 03:42:13 PM

Cal Custom finned aluminum worked for me. I would be willing to trade them for a nice set of chrome Power by Ford covers.

Title: Re: Ford Fe valve covers
Post by: bn69stang on June 24, 2013, 06:07:50 PM

You should be fine then enjoy your new valve covers .. Bud