FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: blykins on December 22, 2022, 07:15:19 PM

Title: Did Moroso ever make valve covers for the FE?
Post by: blykins on December 22, 2022, 07:15:19 PM

You see the classic gold valve covers for the Cleveland, Windsor, 385 series, etc., but I've never seen a set for the FE.  Did they make them?

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: fekbmax on December 22, 2022, 08:48:03 PM

Never could get them back in the 80's or 90's so back then I always went for the Milodon covers and cleaner. Actually liked the look alot. Most every body else had the moroso stuff on there Chevys and small block fords.

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: fryedaddy on December 22, 2022, 10:49:03 PM

i have a red air cleaner by moroso i bought in the 80s.i dont think they had valve covers or i would have bought them.i bought a set of holley valve covers late 80s early 90s that i still have

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: MeanGene on December 23, 2022, 11:46:31 AM

I have a set of stamped ones, but I think they are Milodons

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: blykins on December 23, 2022, 11:59:32 AM

Milodon still makes them.

https://www.jegs.com/i/Milodon/697/85652/10002/-1

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: Stangman on December 23, 2022, 09:55:26 PM

I had the Edelbrocks years ago they didn’t look bad. I believe 4462 part number

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: winr1 on December 25, 2022, 08:59:00 PM

Sold a pair of stamped FE valve covers 5 or 6 years ago

They were gold looking, flat on top, straight sides, almost square with barely a curve

Could almost swear they had MOROSO stamped on the top, will look and see if I can pics on my PC



Ricky.

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: Barry_R on December 26, 2022, 02:32:22 PM

The Moroso stamped aluminum valve covers for SBF, SBC, BBC, and Cleveland were pretty cool and the "standard" for drag engines from the late 70's into the early 80's - especially in "gold".  You had to be gentle with the fasteners - or use those wing nut top deals.  I do not recall ever seeing a set for the FE though.

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: cammerfe on December 26, 2022, 11:13:23 PM

I aggree with Barry

KS

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: Russ67Scode on December 27, 2022, 11:24:36 AM

Not gold but here is a picture of Moroso aluminum VC’s on my highriser

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: MeanGene on December 27, 2022, 02:35:54 PM

Just found mine, they are chrome MILODON

Title: Re: Did Moroso ever make valve covers for the FE?
Post by: DWKgalaxie on January 02, 2023, 01:22:05 AM

Maybe a set from Barry at Survival that were either anodized gold or powder coated gold would look pretty good.