FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: Stangman on August 30, 2022, 04:32:16 PM
-
So I finally got my motor back into the car and after finding out that the fuel that was in my car was bad I emptied it out and put new fuel in and took her
for a 2 mile ride around the neighborhood. I still have break in oil in it which is like water at temperature so I was easy on it. Well I rapped on it once for a second and it feels good.
I would like to thank Blair for his work and teaching me some things along the way. Gotta get her registered and inspected and give her alittle more of a run. Driving around with open headers and no registration and inspection is alittle tougher in new york. One good thing is the tranny seems to work well I had a buddy at a tranny shop go through it for me. I got one of those nice breathers for
the back of the intake and had to grind it down to make it fit my Qiuck fuel carbs that hurt alittle. When I get the break in oil out of it I will be able to see how she runs. Again thanks Blair .
-
That has to be satisfying.
How many years on the fuel sitting? It was not at varnish stage I hope. I took some stuff out of a bike here that sat five years. It would be useful for sealing a deck or some outdoor furniture!
If you get any stupid behavior from engine you might have to pull a bowl and see how it looks inside.
Good luck!
-
Well I wouldn’t say varnish but it wasn’t clear had a hint of yellow in it. It was a year old and I put stabilizer in it. I drained it all out and put fresh fuel in and it runs good so it was definetly bad. It looked worse when I drained it to dispose it. Good news is unless some obstacle comes up I will be at the reunion.