FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Royce on July 28, 2022, 02:08:28 PM

Title: 427 2x4 intake
Post by: Royce on July 28, 2022, 02:08:28 PM

Can anyone tell me the center to center distance between the carbs on the med riser manifold?

Title: Re: 427 2x4 intake
Post by: Lg57 on July 28, 2022, 03:30:52 PM

I get 8 9/16" on my C7AE-9425-A that's on my ERA Cobra.

Title: Re: 427 2x4 intake
Post by: jayb on July 28, 2022, 03:55:59 PM

I measure it as exactly 8.60" on the CNC machine, assuming that the manifold I measured was accurate.

Title: Re: 427 2x4 intake
Post by: fordman460 on August 03, 2022, 05:21:14 PM

It is 8-5/8. Investigated this before.