FE Power Forums
FE Power Forums => Non-FE Discussion Forum => Topic started by: Heo on March 30, 2022, 03:14:23 AM
-
Somebody in here that got axess to a 36 coupe, and can supply me with a few meassures?
-
Will a '37 work, Heo? If so, shoot me what you need.
-
Will a '37 work, Heo? If so, shoot me what you need.
Thanks, but the meassures i need is different from a 37
-
I have a 36 street rod , stock body , depends on what you need.
-
Thanks i do a drawing and send pics of what i need.
-
Here what i need
(https://i.postimg.cc/1t7Q7Prw/thumbnail-IMG-05331.jpg) (https://postimg.cc/gXhQrC52)
(https://i.postimg.cc/3RzKJY07/thumbnail-IMG-05341.jpg) (https://postimages.org/)
I hope you understand what im after
I got fordoor door that i understand is the same except a bit higher in the rear so i have to modifie them
and i missing the rear portion of the coupe roof but have some sedan boddies that can donate that part
and top of the B pillar is cut off with an axe so have to use donor sedan parts there an create a quarter window
-
I should be able to get that for you , it will be in inches , not to good with the metric system.
-
inches will be okay im used to that.
and i forgott i need the width of trunklid opening also
-
I will get that for you tomorrow , I took your advice about enjoying life. so I went to a swap meet today and walk for 5 hours and then went by pick and pull on the way home .
-
No stress, enjoy life. The 36 is still snowed in so no hurry
-
gdaddy the snow in front of the barn with the 36 has tawed yesterday
so i start to need the meassures now
-
thanks for jarring my head, just drove the coupe to get lunch today, will get the measurements for you. 66 dollars for gas to fill up. ouch.
-
thanks for jarring my head, just drove the coupe to get lunch today, will get the measurements for you. 66 dollars for gas to fill up. ouch.
Well......I dont know how empty your tank was but for me it was probably a bargain with our
curent price of 8.30 a gallon :'(
-
I figured yours was a lot more, we are trying to catch up though. about to get your measurements, stay tuned.
-
a=17 " b=17" c=11 5/8" d=12 7/8" e=3 1/2" trunk lid 37 7/8" top and bottom, hope this helps, if you need anything else let me know.
-
Thank you , much apreciated now i can start patch togehther Frankencoupe´