FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Skeeter65 on December 20, 2021, 10:12:51 AM

Title: Rocker Arm Studs
Post by: Skeeter65 on December 20, 2021, 10:12:51 AM

Need some suggestions on Rocker Arm Studs to go on my TFS heads. I see TFS sells a kit but wondering if they are the way to go or is there another option I should look into such as ARP?

Title: Re: Rocker Arm Studs
Post by: blykins on December 20, 2021, 10:40:49 AM

Edelbrock, Trick Flow, or Precision Oil Pumps.   I know for a fact that Doug's at POP are ARP.   Pretty sure that the others are as well, just remarketed and marked up.  Any of them will be fine.

Title: Re: Rocker Arm Studs
Post by: Skeeter65 on December 20, 2021, 11:23:02 AM

Thanks, Brent. So these should work for my heads then?

https://stores.precisionoilpumps.com/ford-fe-427-mr-tp-edelbrock-rocker-stud-kit/

Title: Re: Rocker Arm Studs
Post by: fairlaniac on December 20, 2021, 11:49:38 AM

One thing to keep in mind, if you have substantial shimming under your rocker stands, you may find the studs to be too short. There are various lengths available.

Title: Re: Rocker Arm Studs
Post by: Skeeter65 on December 20, 2021, 11:57:12 AM

Thanks, I will keep that in mind. I will be running HS adjustable rockers, but I will find out when I get to that point.