FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: winr1 on November 03, 2021, 12:16:00 AM

Title: .. SOLD .. $225.00 JPT C4 to FE bellhousing
Post by: winr1 on November 03, 2021, 12:16:00 AM

I bought this and was not told of the welding or machine work

Middle starter hole is looser than the 2 outer holes but not a bunch

Dust plate holes are 5/16th, cant remember if that is original or not


Bell housing with spacer/starter plate weighs a bit over 14 lbs


I had a 1976 F150 C6 built and will use it instead of a C4


Will be moving as soon as I can and selling a lot of stuff


 ...   SOLD ...$225.00 plus shipping


(https://i.postimg.cc/bJprbtTz/IMG-7391.jpg) (https://postimg.cc/cKkdG62j)

(https://i.postimg.cc/vTmm2wkk/IMG-7392.jpg) (https://postimg.cc/KkdF4wZD)image uploaders (https://postimages.org/)

(https://i.postimg.cc/9FrMGVGq/IMG-7393.jpg) (https://postimg.cc/2VNrDs9z)

(https://i.postimg.cc/J0gRTDbH/IMG-7395.jpg) (https://postimg.cc/fSc4ybqM)

(https://i.postimg.cc/fbKZGgcN/IMG-7396.jpg) (https://postimg.cc/06bLmnXW)

(https://i.postimg.cc/jCVGwzHc/IMG-7397.jpg) (https://postimg.cc/2LwHgLXL)

(https://i.postimg.cc/Z5JJwSNc/IMG-7400.jpg) (https://postimg.cc/WhfR4xXF)

(https://i.postimg.cc/bvsc5NwQ/IMG-7401.jpg) (https://postimg.cc/gwFTXpRJ)foto hosting (https://postimages.org/)

(https://i.postimg.cc/sxCk1Y9c/IMG-7402.jpg) (https://postimg.cc/9R18nqkR)

(https://i.postimg.cc/9fqgT4fN/IMG-7484.jpg) (https://postimg.cc/wtgkYjLh)



Ricky.

Title: Double post
Post by: winr1 on November 03, 2021, 12:20:40 AM

Double post

Title: Re: $225.00 JPT C4 to FE bellhousing
Post by: winr1 on November 05, 2021, 07:00:00 PM

Lowered price



Ricky.