FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Jb427 on July 01, 2021, 11:43:27 PM

Title: Hurst shifter handle
Post by: Jb427 on July 01, 2021, 11:43:27 PM

dose anyone know the a part number for a shifter handle that will fit 66 fairlane bench seat with this style comp + shifter?

here is a link to the type of shifter i am using https://www.holley.com/products/drivetrain/shifters_components_and_accessories/manual_shifters/competition_plus/parts/3916848

Title: Re: Hurst shifter handle
Post by: GerryP on July 02, 2021, 07:34:11 AM

That's the wrong shifter for your Fairlane.  Here's the correct body: 
https://www.holley.com/products/drivetrain/shifters_components_and_accessories/manual_shifters/competition_plus/parts/3913180

And this is the replacement with just the body and a bolt-on shifter:

https://www.holley.com/products/drivetrain/shifters_components_and_accessories/manual_shifters/competition_plus/parts/3915405

I don't know, but maybe you can find a stick that fits that body for your Fairlane.  Finding a stick for a body that does not fit your car is going to be more difficult.

Title: Re: Hurst shifter handle
Post by: Jb427 on July 02, 2021, 08:05:11 AM

They don't list a handle for the bolt on style that I know of.
 I was hoping some one here had used the bolt on type and found a handle they liked.

Title: Re: Hurst shifter handle
Post by: 428kidd on July 02, 2021, 08:09:39 AM

I have this used one , but it's the whole unit. Pm if interested.

Title: Re: Hurst shifter handle
Post by: Jb427 on July 02, 2021, 08:32:52 AM

Quote from: 428kidd on July 02, 2021, 08:09:39 AM

I have this used one , but it's the whole unit. Pm if interested.

Thanks for the offer 428kidd

 i am only after info on a bolt on handle only

shifter is stock 66 67 fairlane mounting location just a bolt on type handle.

Title: Re: Hurst shifter handle
Post by: 428kidd on July 02, 2021, 08:42:07 AM

No problem if you change you r mind hollar this came from a 67 Fairlane. Thanks Lance.

Title: Re: Hurst shifter handle
Post by: Jb427 on July 02, 2021, 08:45:53 AM

Cheers Lance This is why i like this forum always people willing to help any way they can.  ;)

Title: Re: Hurst shifter handle
Post by: Rory428 on July 02, 2021, 10:42:57 AM

Maybe the Fairlane shifter body is different, but every aftermarket Hurst Competition Plus shifter that I ever had for a Toploader, had the shifter handle welded on, and non removable. Seemed most other applications had a bolt on handle, as does my Toploader Hurst Super Shifter 3, as well as the factory Hurst shifter used in 1970 Mustangs/Torinos etc, although those were clipped in place.

Title: Re: Hurst shifter handle
Post by: gt350hr on July 02, 2021, 12:59:31 PM

   I have a "factory" bolt on handle for a '70 Torino . Could be drilled to work on the "normal" Hurst shifter. $75 shipped to US address. I can't provide pictures so please don't ask. 100% satisfaction guaranteed , it IS what I say it is. Coarse thread and mark where the "set screw" on the "T " handle was tightened. Condition excellent , not "perfect" as it is pre owned LOL.
   Randy

Title: Re: Hurst shifter handle
Post by: gdaddy01 on July 02, 2021, 06:25:26 PM

truck handle may work , I have cut the bottom down some and leave the bend at the top , drill the holes to bolt it on .