FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: R-WEST on June 12, 2021, 11:23:08 AM

Title: Thoughts on TFS and/or Edelbrock Aluminum 351C Heads?
Post by: R-WEST on June 12, 2021, 11:23:08 AM

I think this is first I've been here in about 5 years!!  Life, work, health conspires against you sometimes.  :o

Looking at doing a stroked 351C (3.75" crank; 6.00" rods) for my pickup and am curious about what you all think about the aluminum "2V/4V" heads, primarily Trick Flow and Edelbrock, that are out there. 

Thanks!!

Title: Re: Thoughts on TFS and/or Edelbrock Aluminum 351C Heads?
Post by: blykins on June 12, 2021, 11:32:38 AM

CHI 4V.

The edelbrock heads flat out stink for the Cleveland.  The CHI performs over the TFS.

Title: Re: Thoughts on TFS and/or Edelbrock Aluminum 351C Heads?
Post by: R-WEST on June 12, 2021, 12:00:56 PM

Hi Brent - I figured you'd pop in right away!!  :)
I'll be in touch.
Thanks,
Ron

Title: Re: Thoughts on TFS and/or Edelbrock Aluminum 351C Heads?
Post by: Falcon67 on June 14, 2021, 03:50:17 PM

Then shortly you'll be wanting a block.  Just sayin'.   8)

Title: Re: Thoughts on TFS and/or Edelbrock Aluminum 351C Heads?
Post by: R-WEST on June 19, 2021, 12:29:03 PM

I already have the 4-bolt block from my '73 Mach 1.  ;D