FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: winr1 on May 18, 2021, 11:13:16 PM

Title: Any idea how much to ask for it .....Cast iron, short C6 tail housing ID please
Post by: winr1 on May 18, 2021, 11:13:16 PM

ID a C6 short cast iron tail housing please
C-6 cast iron tail housing
RF C8TP
7A040
W 2
.............................
End piece
P
C8TP
7085-A
........................................
(https://i.postimg.cc/43rv8Swn/IMG-7052.jpg) (https://postimg.cc/McmjHtC8)
(https://i.postimg.cc/nzb7KQcD/IMG-7053.jpg) (https://postimg.cc/Mc5vqHB6)
(https://i.postimg.cc/2jTbytvv/IMG-7054.jpg) (https://postimg.cc/6T251YM5)
(https://i.postimg.cc/50byN52n/IMG-7057.jpg) (https://postimg.cc/8FXNZ6W6)
(https://i.postimg.cc/ncgLQfLs/IMG-7058.jpg) (https://postimg.cc/tYdbLfWy)
[img]https://i.postimg.cc/.../url][url...//banks-nearme.com/]boa open hours (https://postimg.cc/94kHdj5P)



Ricky.

Title: Re: Cast iron, short C6 tail housing ID please
Post by: TimeWarpF100 on May 19, 2021, 10:54:52 AM

Quote from: winr1 on May 18, 2021, 11:13:16 PM

ID a C6 short cast iron tail housing please
C-6 cast iron tail housing
RF C8TP
7A040
W 2
.............................
End piece
P
C8TP
7085-A
........................................
(https://i.postimg.cc/43rv8Swn/IMG-7052.jpg) (https://postimg.cc/McmjHtC8)
(https://i.postimg.cc/nzb7KQcD/IMG-7053.jpg) (https://postimg.cc/Mc5vqHB6)
(https://i.postimg.cc/2jTbytvv/IMG-7054.jpg) (https://postimg.cc/6T251YM5)
(https://i.postimg.cc/50byN52n/IMG-7057.jpg) (https://postimg.cc/8FXNZ6W6)
(https://i.postimg.cc/ncgLQfLs/IMG-7058.jpg) (https://postimg.cc/tYdbLfWy)
[img]https://i.postimg.cc/.../url][url...//banks-nearme.com/]boa open hours (https://postimg.cc/94kHdj5P)



Ricky.

'68 - '70   truck, Think they went to aluminum in '71

Title: Re: Cast iron, short C6 tail housing ID please
Post by: HarleyJack17 on May 19, 2021, 01:36:42 PM

Wouldn't the truck be a 4x4? I know the divorced Transfer case 4x4 trucks 3/4 used this part, mine is aluminum-1975.  Thought 4x2 trucks had the long tail shaft.  Just for clarity.
I know some early cars used a short cast housing too but not thinking that late in the run based on your year i.d.

Title: Re: Cast iron, short C6 tail housing ID please
Post by: winr1 on May 19, 2021, 02:28:54 PM

Thank guys  :)

I bought a 4 barrel 65 352 and the C6 was bolted to it

PO said the mill an trans were pulled from a mid 60s truck, I didnt ask about the truck



Ricky.

Title: Re: Cast iron, short C6 tail housing ID please
Post by: gdaddy01 on May 19, 2021, 05:19:50 PM

what ? did not ask about the truck , did you read the post on prices of old trucks ? just joking with you .

Title: Re: Cast iron, short C6 tail housing ID please
Post by: winr1 on May 19, 2021, 05:28:33 PM

Ha ha ... I did indeed see the post ..lol  ;D

The Slicks on facebook seem to have increased in value as well ....
.......................................


Any idea of how much I should ask for the tail housing ??

.............................................................................



Selling all I can, wish to move before winter, want out of this HOA



Ricky.

Title: Re: Any idea how much to ask for it .....Cast iron, short C6 tail housing ID please
Post by: badcatt on May 19, 2021, 09:32:13 PM

This is the C6 out of a 1971 F250 Short Cast Iron tail shaft.

(https://live.staticflickr.com/65535/51189838672_9b0b2c5b7f_c.jpg)

I removed this from the truck last year and I'm holding on to it as I may need the main case.

Title: Re: Any idea how much to ask for it .....Cast iron, short C6 tail housing ID please
Post by: winr1 on May 19, 2021, 09:59:59 PM

Thank ya badcatt  :)

Thats what I am doin .... keepin case an innards


Have a C6 out of a 76 that had a 351M..... keepin the long tail housing an innards as well



Ricky.