So as of about three weeks ago…..Blair Patrick Enterprises is the only distributor of BBM heads. We are now handling all BBM head sales. I get all of the castings, handle all technical questions, do all finish work, and handle shipping to customers. I did a total redesign of the intake and exhaust ports, and made some improvement to the already very good chamber he had. The new castings have C8OE-BP casting ID. The heads are very good. I offer five different combinations. The base combo is a CNC clean-up intake port and as-cast exhaust and chamber. That version with 2.200/1.665 valves will flow 340/240(pipe) out of the box. The .500 lift flow on the base 2.200 head is 315 cfm. Various versions flow more and less depending on the valve sizes. A 2.250/1.680 with full CNC job will flow 320+ at .500 and 360 -ish at .800. CNC exhaust will flow 265-270 with a 2x6 pipe. Intake valve options 2.100, 2.200, 2.220, and 2.250. Exhaust valve options are 1.625, 1.665, and 1.680. I have versions with different prep for enhanced low and mid lift flow, and versions for high lift flow with extremely large cams. I have six go-to spring packages depending on cam being used, so you don’t have to buy heads and then re-buy a spring package. Beehive, conical, and high end solid roller dual springs. These are all combos I have used and I know they work. Cam/lifter/spring packages are available.
First 15 pairs sold. 20 pairs being cut now. 10 pairs of the second run spoken for. 25 more pairs of castings should be in my hands in the next 2-3 weeks. The supply looks to be steady for the near future.
This is one of those public service announcements, so no pricing discussed here. I just saw this thread and thought I would share the info. I have a new dedicated phone number for BBM heads and other parts sales. 423-802- two four seven two. If I don’t answer it, you can text or leave a message on that number. Best chance to get me is between 8:15 AM and 10:15 AM Central M-F.
Hopefully Mr. Jay won’t deem this post inappropriate. If we can help you guys, let me know.
Thanks,
BP