I am finally getting close to getting my TP engine and TKO 600 transmission installed in my 66 Fairlane. I had really hoped to have this done before now but family and other issues had to come first. I won't bore you with the details.
I know this has been covered but I tried searching and couldn't find what I was looking for. I want to install the engine and transmission together.
My plan is to leave the rear wheels on my lift and raise the rear end up high enough to shoehorn it all in. Was wondering how high it needs to be raised and what I need to watch out for. Do the front wheels need to be on blocks to keep the bumper from preventing the lift from sliding under it? I would appreciate any input and any pictures you may have of doing this.. I plan on taking pics during this to share in case someone needs help in the future.
Hopefully when I get everything together I can recruit enough help to get it done.. My wife helped me swap the motor in my 76 Bronco so
I can get her to run the hoist if need be
.
Thanks
garyv