Author Topic: Bullock's Power Service - pump gas 457 iron head CJ - 528HP / 555TQ  (Read 325 times)

0 Members and 1 Guest are viewing this topic.

My427stang

  • Hero Member
  • *****
  • Posts: 3943
    • View Profile
Performance Summary:
      Cubic Inches:  457             Dyno brand: Stuska
      Power Adder:  N/A             Where dynoed:  Dale Meers Racing, Buffalo, KY
      Peak Horsepower:  528@5900
      Peak Torque:  555 @ 4000


Engine Specifications:
   Block brand, material, finished bore size, other notes:  1969 C scratch 428, 4.150 bore, CnC squared, aligned, torque plate honed
     
   Crankshaft brand, cast or forged, stroke, journal size: SCAT cast 4.25
     
   Connecting Rods brand, material, center to center distance, end sizes, bolts:  SCAT I-beam 6.700

   Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Racetec, 14 cc dish, 10.03:1

   Main Bearings, Rod Bearings, Cam Bearings brand and size:  Clevite rod and main bearings, Durabond cam bearings

   Piston rings brand, size, other notes: Mahle 1mm/1mm/2mm standard tension

   Oil Pump, pickup, and drive:  Melling M57HV, Canton pickup, ARP drive

   Oil pan, windage tray, oil filter adapter:  Cobra aluminum repop, no tray, factory oil filter adapter

   Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050"):  Custom Bullock's Power hydraulic roller, 237@.050 intake

   Lifters brand, type:  Morel standard travel

   Timing chain and timing cover: Cloyes 9-position roller, Roush alum timing cover

   Cylinder heads brand, material, port and chamber information:  C8OE-N CJ, Les Schmader ported, 3/8 unknown aftermarket undercut stem valve, 2.09 intake, 1.67exhaust, Viton seals, ID spring locators

   Valve springs: Crower 160/420
 
   Rocker arm brand, type (adjustable or non-adj), material, ratio:  Factory nonadjustable, 1.73

   Rocker shafts and stands, brand, material:  Harland Sharp shafts, Trick Flow studs, Precision Oil pump end stands

   Pushrods brand, type, length:  Custome Smith Brothers 5/16, 3/8 ball/ball non-oiling

   Valve covers, brand, type:   69 CJ aluminum

   Distributor brand, advance curve information:  Pertronix billet, 38 total

   Harmonic balancer brand:  Stock, restored

   Water pump brand, type (mechanical or electric):   Tuff Stuff aluminum- electric powered on dyno

   Intake manifold brand, material, porting information:  Blue Thunder CJ, with divider notch cut

   Carburetor(s) brand, type:  750 dyno carb, but engine will run a Terminator Stealth

   Exhaust manifolds or headers brand, type:  Dyno headers


« Last Edit: May 04, 2024, 07:37:06 PM by My427stang »
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

Joe-JDC

  • Hero Member
  • *****
  • Posts: 1496
  • Truth stands on its own merit.
    • View Profile
I have wondered how a CJ would respond to a stroke like this.  Looks to be a neat build.  Joe-JDC
Joe-JDC '70GT-500

blykins

  • Hero Member
  • *****
  • Posts: 4836
    • View Profile
    • Lykins Motorsports
That has to be the biggest cam I've ever seen!  2379 degrees of duration!  :D
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

My427stang

  • Hero Member
  • *****
  • Posts: 3943
    • View Profile
Too funny! Special cam stays open 10 times as long, more power!
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

Joe-JDC

  • Hero Member
  • *****
  • Posts: 1496
  • Truth stands on its own merit.
    • View Profile
I figured you forgot the decimal point.  LOL.  Joe-JDC
Joe-JDC '70GT-500

My427stang

  • Hero Member
  • *****
  • Posts: 3943
    • View Profile
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch