65 F100 ... 3300 lbs..... 4 speed or C6 ... 3.75 gears
.040 over 390 block... 390 or 428 crank ( keep changing my mind )
1 3/4" full length headers, ported Edelbrock 390 Performer intake, any carb, any mufflers/pipes.... any cam
Nice set of D2 heads... have stock size valves and CJ size valves
Not gonna turn the mill much over 5,000 rpm.. if ever .... want the mill to pull hard in any gear
Will drive on weekends, to shows/cruise ins ... etc ..
What does the forum think on valve size and cam, carb ??
Ricky.