FE Power Forums

FE Power Forums => FE Technical Forum => FE Engine Dyno Results => Topic started by: Royce on May 31, 2021, 10:34:07 AM

Title: 352/360 dyno results
Post by: Royce on May 31, 2021, 10:34:07 AM

Not as good as I had hoped

Title: Re: 352/360 dyno results
Post by: frnkeore on May 31, 2021, 12:27:23 PM

With just the hp increase that the carb gives, it makes you wonder what the 390 manifold would have done.

Title: Re: 352/360 dyno results
Post by: gdaddy01 on June 04, 2021, 09:35:02 PM

is that a stock waterpump , looks like a long pulley shaft . I like the looks of the engine . what rpm are the shortie manifolds good for before headers would be better ?

Title: Re: 352/360 dyno results
Post by: Royce on June 07, 2021, 08:15:27 AM

Yes  stock water pump for a 60 FE...Just guessing but I would suspect headers would start to eclipse the manifolds at about 4000 rpm

Title: Re: 352/360 dyno results
Post by: gdaddy01 on July 07, 2021, 07:12:15 PM

thanks , was wondering about maybe running the short manifolds instead of headers on a street truck , 1949 f 1 with 1966 t- bird 390 engine