I'm looking to sell a complete assembled 3.89 31 spline open 3rd member originally out of a 68 Shelby GT-350 with 4 speed. It's got a non-lettered C4AW-B nodular iron case with a December 21 1967 date code. Has a Daytona pinion bearing carrier and the Mustang pinion yoke shield/snubber. I have the original assembly tag with "DSO C8ZX - A, 3.89 8AC 960" stamped into it. Looks like it's never seen road salt, probably been in CA it's whole life. The carrier has no rust and still has the original pink and yellow assembly paint, though faded. The rubber is intact on the snubber, and the steel on the snubber has light surface rust. The tag has some waviness, but no rust and still shines bright and is completely legible.
The mileage is unknown, but it doesn't look like the assembly has ever been taken apart, and the backlash on the gears feels acceptable. The yoke has been swapped for a non- Daytona short style 1310 yoke, but I have a correct style long 1330 yoke for use with a Daytona pinion carrier with a D2 number I will send with it.
I don't have the axle housing or axles, just the complete center section and the assembly tag.
I'm looking to get $1,100.00 plus shipping from Ventura, California (about 50 miles north of Los Angeles). I might entertain trade offers, depending on what you have, need not necessarily be FE.
I have about 30 pictures I can email, and can take more. email me at blueshirtguy at h0tmai1 dot com.
Brett
