T-10 linkage

[olman]

Have my T-10 linkage off my 63 and noticed the ends of the shifter arms are getting a little loose. Is there a bushing kit that will fix that like the steel bushings on a Hurst shifter?

[winr1]

https://www.amazon.com/Hurst-3327302-Steel-Bushing-Pack/dp/B000BWALCO#customerReviews

Verified Purchase
These worked fine but would not fit on my shifting roads at the tranny end of the rod. So I used them on the shifter end of the rods and ordered the nylon bushings on amazon for the end of the rods at the tranny. My rods were tapered at the tranny that is why these non tapered bushings did not work.
Note
My rods are hurst and these are hurst so not sure why the would only work on the tranny ends. I have a Muncie so yours might work on both ends.
I would recommend to a friend and price on Amazon is great.


Not sure what the above means ....
..........................................................................................


I will dig my T-10 shifter/linkage out and see if I can help



Ricky/