« previous next »
Pages: 1 [2]  All

Author Topic: Duraspark, need a resistor or not?  (Read 1491 times)

0 Members and 1 Guest are viewing this topic.

TomP

  • Hero Member
  • *****
  • Posts: 874
    • View Profile
Re: Duraspark, need a resistor or not?
« Reply #15 on: July 23, 2023, 07:59:29 PM »
I have always hooked the two wires from the Duraspark up with the red wire to the car's original coil wire (red/green strips) and the white wire to the one that bypasses the resistance wire for starting. Never noticed any RPM issues
Logged

427Fastback

  • Hero Member
  • *****
  • Posts: 603
    • View Profile
Re: Duraspark, need a resistor or not?
« Reply #16 on: July 24, 2023, 12:24:00 AM »
Thats not the question Tom...Question is does it need a resistor..I dont run that harness as i run mechanical gauges and dont need the wires hanging around.I wire my Duraspark to the run side of the solenoid and unplug the harness.All my builds have monte carlo bars so i run the wire behind that.The question is...Does it need a resistor ????
Logged
1968 Mustang Fastback...427 MR 5spd (owned since 1977)
1967 Mustang coupe...Trans Am replica
1936 Diamond T 212BD
1990 Grizzly pick-up
Pages: 1 [2]  All
« previous next »