cross bolt main cap

[fekbmax]

Need one cross bolt main cap #2 or #4.

[Barry_R]

Original or aftermarket block?

[fekbmax]

original ford block.
id take a stock iron cap or swap the two i have and possibly some $ for a set of good used pro-gram or other billet caps. i can make either work but was hoping to find 1 standard factory cap to go with the two i have.

[GJCAT427]

I looked in my stash and I do have a *2 main cap. I thought I had 2 of em but found just 1.  What ya got for trades?

[fekbmax]

i don't have much, most of my stuff is race type stuff.
i have 15 of these laying around, 1 short of a set,

have a couple of center hung Holley float bowls,
have some $$$,
what are you looking for ? i got some old stock type 390 stuff laying around.

[GJCAT427]

What do you figure the rockers are worth? I`m not sure what the cap is worth?

[fekbmax]

Idk. Ill clean them up and I fig $3 each. I know there all in descent shape. There old TRW stock. That's like $45. For all 15..  I'll toss in the two center hung float bowls to if your intrested..
if not I could do the cash instead if you have a # in your head.
Thanks for thinking about it anyway..
I found the two, he thought he had all 3 but searched all over and couldn't find it. Id even take a #3 if need be cause I'm going to align bore the old block anyway.