FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: winr1 on June 01, 2023, 12:20:42 AM
-
Need a distributor spring for an FE .. not the big one but the smaller one
Have 2 Mr Gasket springs and my mech. advance is coming in a bit to early
Searched online and not sure if anything I found would work, the specs were not clear
Ricky.
-
Ricky: I've got at least 20 FE distributors. Ford. Motorcraft Mallory Accel and others. How do I figure out which spring you need?
Free including shipping.
Saw your wanted for an FE block on HAMB, but I'm to far away. It would be free except shipping.
FERoadster
-
Hey Richard :)
Sorry was not clearer
It is a Ford single point with vacuum advance
It originally had a small spring that stretched out a bit to install and a heavier spring that was a lose fit
I need a small spring that has to stretched out a bit to install
I cleaned out my storage and brought a bunch of stuff home, need anything ??
Ricky.
-
OK I did message you just now. I'll pull a vacuum advance distributor off the shelf and message you a picture.
Richard
-
I brought home my Daddy an I's storage stuff, found a spring from an old distributor
Forgot all the old small block an FE stuff, bunch of stuff marked C2 and up, alts, starters an such
Ricky.