Anyone know why Miller's seem to be 'MIA' @ dragweek this year..........Tom

Just received a new discount code good till 3-20-22.  Feel free to use er up 195471386177071742..........Tom

Do to weather the race weekend is postponed to Sept. 18-20, still time to get a couple of FE's entered!!!!!!!

Does anybody have a picture of the graham rockers they could post so i can see what they look like??? Are they still in business yet?? Afret or anybody, thanks..........Tom

For sale is a nice used 288r roller cam and lifters, this cam was in a 427 a close friend bought, the lifters were sent back to comp for rebuilding and 2 were replaced. Engine had about 45 minutes to an hour run time on the test stand, and some dyno pulls,  then about 200 street miles. He went a different direction and no longer needs this. Asking $495.00 for the set, plus the ride.  Specs are .645 lift 292 adv. duration 243@.050 and 110lobe center 106 int.c/l lash is .020/.020  Listing for a friend, he does not have access to the forum...............Tom

good till 7-21-19   109450124103563300  happy shopping...........Tom

Motor is 428 @ 4.160 bore, has not been honed for pistons yet, with head on block with exh. valve pushed till retainer hit the guide there is .020 clearance between the valve and bore. The heads are Edelbrock 6005 with 1.750 exh. valves. Our question is will it work like this or should we take a little off the valve. I'm helping a friend and we want the motor to run good. It will be a 462 stroker any thoughts, Blair,Brent , anyone..........Thanks.............Tom

The rockers must be the centered ones   I think a couple would do thanks..............Tom