We recently did a 79 Monty,the other big block.Used a lot of Team Z stuff such as....K member-nice piece,used 2 inch spacers to keep most of the motor under the hood,glass 4 inch cowl hood,can't recall vendor.Maximum Motorsports bump steer,camber caster plates.Ford racing BBF 460 swap motor mounts use FE rubber insulators if that helps.through floor sub frame connectors-super sturdy,apparently Z makes em for Fairmont as I actually had to trim some off.A little cumbersome under foot for street. Battle Boxes for rear torque boxes.Quick Performance custom rear housing,narrow as possible.We got 28 by 10.5 drag radials under it with no tubs at all but barely get them on without dropping suspension.Team Z adjustable anti roll setup really helps 60 ft,remove 1 bolt for street.The list is long.