Ok, I have some combos that were *close* to each other, but I can't find anything identical and only difference was lifter type.
I have found:
*A 428 with out-of-the-box Edelbrock heads, Tunnel Wedge, camshaft was solid roller 248/254 @ .050", 286/292, ~.680" lift, 110 LSA, 11:1 compression, 533 hp @ 6400, 472 lb-ft @ 5400.
*A 427 with 280 cfm LR heads, ported C3 2x4 intake, camshaft was solid flat tappet, 252/260 @ .050", .640" lift, 106 LSA, 510 hp @ 6100, 511 lb-ft @ 4200.
So basically I have nothing.... LOL I use so many custom camshafts though, and I rarely use the same one twice.
Something that I did find that was fun to note....the difference between cylinder heads.
First combo was a 430 cube combo, out of the box Edelbrock heads, Blue Thunder 1x4 intake, 10.7:1, 240/246 @ .050" solid flat tappet, 108 LSA, .620" lift, made 476 hp @ 5700, 489 lb-ft @ 4400.
Second combo was a 433 cube combo, CNC Pond heads, Performer RPM intake, 10:1, 243/249 @ .050" solid flat tappet, 108 LSA, .620" lift, made 529 hp @ 5800, 552 lb-ft @ 4300.