FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: Gregg on May 05, 2020, 07:42:13 AM

Title: 64 Galaxie suspension recommendations / questions
Post by: Gregg on May 05, 2020, 07:42:13 AM

I'm getting ready to dump the lower control arm offset shafts for the Rare Parts kit (already have that, and the Quickor front stabilizer bar) and I'm planing on rebuilding the front end while it's already primarily taken apart.  Someone on the Galaxie Facebook page recommended PST.  Their Super kit is $439 and seems to include everything.  But their Yelp reviews don't look very good.  I can find some parts on Rock Auto (Moog upper ball joints and some of the bushings) but the sticking point seems to be lower ball joints.  All I've found for lower ball joints are Rare Parts (very pricey) or unknown brands of unknown origin (likely China, maybe India).  Has anyone here used the PST kit, or any other kit for that matter and if so what are your thoughts?  Any other suggestions or recommendations are very welcome.

Title: Re: 64 Galaxie suspension recommendations / questions
Post by: Drew Pojedinec on May 05, 2020, 09:28:14 AM

This was just discussed one forum up in FE tech. Check it out

Title: Re: 64 Galaxie suspension recommendations / questions
Post by: Gregg on May 05, 2020, 09:39:53 AM

Thanks, I'll check it out.  I posted over here since it wasn't an engine related question.