FE Power Forums
FE Power Forums => Member Projects => Topic started by: 62Falcon390 on February 15, 2021, 04:56:12 PM
-
removed the top plenum and bolting on 4 barrel type throttle bodies on the lower base. made up a couple spacers ready for the TB's. they showed up today and the air cleaners so little photo op till i get everything else gathered and set up.
-
looks nice and it might make more power.
-
that front mount throttle body was small.. it was still scarey fast,, but i think i might actually wet myself this time lol
-
few more pictures
-
It looks Cool with the two fours, and more wow factor,
-
i have a cobra oval top coming in the next week or so,, though i better fix my hood hole,, when the air cleaner is placed i will finish the hole nicer
it was just a big hole first
-
got my oval cleaner lid,, trimmed the base.. had to move the air cleaner 1-1/2in forward to clear the hood.. i will bead blast the lid and finally get things set up
-
blasted the lid and raising the boss hood scoop up 2-1/4 inches so i can fit a 3in K&N filter under it.
-
few new pictures
-
Looking great!
-
few new pictures