I bet you can do it Doug, Its not that hard, you should See how much
a stock wheel is out of round and side to side. If you take a old Ford
wheel, preferably one with riveted center since its easier to drill the
rivets than grinding the welds. And a cheap 10 inch wheel,Whitespoke,
rusted fake wirewheel etc. There is a code stamped on most wheels
15J 8 for example where J is the inner dia of the rim so a J center fits
a J rim
Drill the rivets knock out the center ,sometimes the center is hard to get out
then you can cut the rim in one place to let go of some of the interference fit.
Take the donor wheel and cut up the center with a torch in pieces like a birthday cake
knock out the pieces and grind away remains of the welds so the rim is nice and smooth
on the inside
Take a piece of 2x4 and a sledgehammer and knock in the center in the new rim to where
you want it. You should not have to hit it to hard once you got it started
meassure with a tape meassure or something that you are close to even from side to side
mount the wheel on the car and fine tune the offset. you can have the tire mounted
If you don't have a Lathe you can take of a front wheel mount your wheel have something...
I used a wheel i welded a 1/4 inch ironbar that i drilled and threaded a hole in the upper end
and used a bolt so i could adjust it in and out. Put it so the bolt is close to the side of the rim
rotate the rim on the spindle and watch for side to side wobble adjust, under 1/8 is okay but
i prefer to be closer to zero, you almost never get to zero because the rim in itself is not
perfect, tack weld, test it on the rear end if fine weld 12-6-3-9 o clock an inch at a time you
can weld with the tire mounted if it is tubeless
I hope you understand my rambling Its not easy to explain in a language your not born in to
You probably earn more recycling coke cans. But like it always is for me ,estimated deliverytime
doubles , the shipping company loose them and when you finally get them they have a Valiant
bolt patern so you cant even resell them
I have two complete power stearings for those Galaxies i could have given you, but i gues shipping
will cost more than they are worth