Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dmazz

Pages: [1] 2
1
Non-FE Discussion Forum / Re: Happy New Year
« on: January 01, 2022, 08:58:44 AM »
   Spot on, Happy New Year

2
Member Projects / Re: engine swap
« on: April 19, 2021, 06:49:45 AM »
Thanks, pictures would great, I'm Derry PA

3
Member Projects / engine swap
« on: April 18, 2021, 07:21:41 AM »
We are in the process of putting a 390 in a 77 F150 custom 4x4 with stock truck 4 speed. We pulled a 302 out of it but the truck had a 351M from the factory. I have motor mount perches out a 76 4x4 390 truck and they only line up with 2 forward bolts on the inside of the frame (upper coil spring mount) and only the forward bolt hole on the top of the frame. We need some direction and this forum is the best place to find it. Surely someone here has done this. We would really appreciate your input. Thank you Denis

4
Private Classifieds / Re: Toploader
« on: January 20, 2021, 07:38:40 AM »
southwestern pa

5
Private Classifieds / Toploader
« on: January 16, 2021, 09:15:59 AM »
24 1/2 inches long, 1 3/8 inch 10 spline input, 28 spline output, Doug Nash Pro Shifted and Mr. Gasket V Gate Shifter. $1500
 PM me or call 412-829-1988, 9am to 5pm Monday thru Saturday

6
Private Classifieds / Re: sidewinder
« on: November 16, 2020, 11:50:38 AM »
The wall looks thin compared to an Ed RPM that I have.

7
Private Classifieds / Re: sidewinder
« on: November 16, 2020, 07:35:54 AM »
7242376280 Denis

8
Private Classifieds / Re: sidewinder
« on: November 15, 2020, 01:33:01 PM »
I don't know how it would match up, never had it on a running motor. I posted the picture of the breather cover hoping someone on here would recognize it. I bought the motor in Dearborn MI 2009. I am in Derry Pa 37 miles east of Pittsburgh.

9
Private Classifieds / sidewinder
« on: November 15, 2020, 08:29:46 AM »
This manifold has been modified it was on a 427 with low riser heads that bought and never ran it. 200 or OBO plus the ride. located in SW PA

10
Private Classifieds / Re: WTB Two rear window regulators for 66 Mercury Comet Cyclone.
« on: June 06, 2020, 06:17:12 AM »
James, I have 2 that came out of a 66 Fairlane I don't know if they are the same as Comet. Where are you located? Shipping may be pricey. Give me a call 7242376280 Denis

11
Private Classifieds / Re: WTB a lower bell housing cover
« on: August 20, 2019, 06:03:57 AM »
Yes the sheet metal one for standard trans, I'll check AMD. Thank you Denis

12
Private Classifieds / WTB a lower bell housing cover
« on: August 19, 2019, 05:08:15 AM »
 Anyone have a lower bell housing cover for a FE for sale? I'm in PA 15627.

13
Private Classifieds / Re: Wtb 427 pistons
« on: May 24, 2019, 06:54:38 AM »
in good used condition, I will take pictures and post them. You can call me 7242376280 Denis

14
Private Classifieds / Re: Wtb 427 pistons
« on: May 23, 2019, 07:20:50 AM »
I have a set that are dished, from a marine engine. $50 bucks plus shipping

15
FE Technical Forum / Re: FE Race and Reunion who is going !!
« on: January 23, 2019, 08:24:33 AM »
Keystone Raceway Park, New Alexandria, PA

Pages: [1] 2