FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: gregaba on June 30, 2022, 12:46:21 PM
-
Anybody know what size the pump mount bolt's going into the block are. My 5/16 tap will go to the bottom but I can wiggle it a little.
I have a new ARP set but the bolt's are 3/8 inch and to big.
Thanks
Greg
-
Pump to block are 3/8". Pickup to pump are 5/16".
-
Interesting time in the world to talk about oil pimps ;D
Sorry Jay
-
Thanks
Greg
-
Just to add: 3/8" X 16t , or often referred to as: 3/8" Coarse-Thread"
Scott.
-
Thanks Scott
I needed to know the teeth number.
Greg
-
Here is a chart I made a few years ago in Excel. It's missing a few. This is a PDF file
Richard >>> FERoadster
-
Thanks
I printed it out and will keep it Handy.
I did find a company that sells all the factory bolts nos and repo's.
Greg
-
You may wish to consider that Precision Oil Pumps sells an ARP stud kit to replace the standard cap screws, originally, used by Ford
-
I wish I would have known that when I ordered my oil Pump from them last month.
I will give them a call and order a stud kit.
Thanks
Greg
-
Interesting time in the world to talk about oil pimps ;D
Sorry Jay
LMAO!! ;D ;D
-
Would Andy Granatelli in the STP suit be considered an oil pimp?
-
You got it.
Greg
-
Would Andy Granatelli in the STP suit be considered an oil pimp?
You win the internet today! ;D
I personally like the ARP studs vs bolts when pimping my oil pumps.