Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Kirk Morgan

Pages: [1] 2 3
1
Private Classifieds / MSD 8594 Distributor NIB and bronze gear and 715 CFM carb body
« on: March 31, 2022, 03:44:51 PM »
 Price Drop New MSD 8594 distributor and bronze gear 350$ plus shipping. Also a 715 CFM carb body with base plate and vacuum pot. List #9029, 2998 date. Appears to be a marine carb. 100$? Shipping from San Antonio TX. Price drop on distributor and Gear. 300$ Also just need a reasonable offer on the carb.50$?

Thanks Kirk 210-887-3331

2
Private Classifieds / 406 standard pistons
« on: November 05, 2020, 06:22:21 PM »
Needing a set of 406 standard pistons.
Thanks Kirk

3
Non-FE Discussion Forum / Re: Robinair 34788 problems
« on: September 30, 2020, 01:22:39 PM »
The one we use to have had two recovery modes. One to recover which was pretty quick and the other mode was a recover and recycle mode which took forever.

4
FE Technical Forum / Re: Dyno day Aug 14 - 2 ways to make power - guess, throw stones, pretty pics etc
« on: August 16, 2020, 06:28:15 PM »
Iam looking at the dyno headers and think the tests should have been done with the ones used in each application. A few years we did a couple of days of testing at Teds and found a world of information on HP and torque with different headers. We used averages to determine the winner. This was a 390 stock eliminator engine.

5
Member Projects / Re: Edelbrock fuel injection install
« on: July 11, 2020, 06:27:58 PM »
I have a Big Stuff3 if you are interested that came off of a small block Ford. I have installed many Fast Easy EFI units and i have always installed a return line with no problems at all. I have installed them with computer controlled timing and without. I must say it was worth the extra expense to use the computer controlled timing function. I did find out it took more refinement and computer control learn time to learn the settings when the engine vacuum was below 11 inches at idle.

6
Non-FE Discussion Forum / Re: Oil for less than a buck a barrel?
« on: April 24, 2020, 06:04:41 PM »
We received a shipment of fuel today. .82 dyed diesel and 1.35 for highway diesel
I remember the fuel embargo back in the seventies i had just moved out of the house. I could not afford to go anywhere.

7
Non-FE Discussion Forum / Re: Oil for less than a buck a barrel?
« on: April 23, 2020, 08:32:19 PM »
The retailers are making a killing. I buy diesel wholesale for the excavation company i word for and 3 weeks ago we paid 1.12$ per gallon for dyed and a 1.53 for highway diesel. We buy about 3000 gallons at a time.

8
Private Classifieds / Re: Wanted 390 Rods, maybe rotating assy.
« on: September 15, 2019, 04:57:04 PM »
I sent you some pictures today. Let me know if you get them.

Kirk

9
FE Technical Forum / Re: Straight thermostat housing for FE?
« on: September 12, 2019, 05:13:38 PM »
I think a big block Mopar will work if you elongate the holes slightly.

Kirk

10
Private Classifieds / Re: Wanted 390 Rods, maybe rotating assy.
« on: September 12, 2019, 05:10:19 PM »
I will take some pictures this weekend. They are in the attic of my garage. I think i have 2 sets. One set has pistons on them.

Kirk

11
Private Classifieds / Re: Wanted 390 Rods, maybe rotating assy.
« on: September 11, 2019, 04:56:34 PM »
I have some rods which you can have for the price of shipping.

Kirk

12
Non-FE Discussion Forum / Re: Ford truck for towing
« on: May 16, 2019, 06:30:17 PM »
If you get a truck with the 5.0 you will not be disappointed. We went to Ohio last year from San Antonio Texas and got 17mph towing a empty 16 foot flat bed doing 75 to 80 miles per hour going. Coming back with a 95 Mustang on the trailer we got 15mph going 70 to 75 miles per hour. Empty gets 20 to 21 miles per gallon. Going thru Tennessee and Kentucky in the mountains we had plenty of power to spare.   

13
FE Technical Forum / Re: Piston ring thickness
« on: December 13, 2018, 07:05:07 PM »
We played with the oil rings also until the engine became a smoke machine. Then added a little more tension. This was on my 390 stock eliminator.

Kirk

14
Private Classifieds / Re: WTB 16" eight lug wheels
« on: November 15, 2018, 06:04:37 PM »
The older Dodge 8 lug will also be a direct bolt on.

Kirk

15
Private Classifieds / Re: Misc parts
« on: September 02, 2018, 05:22:27 PM »
I have a C-6 trans. Where are you located at? I want 200 for it. Iam in Texas.

Kirk

Pages: [1] 2 3